Well after the failure of the first print I was kind of pleased!!! Until it failed it was printing way better than I had expected for a first print.
There were a few issues, as well as the failure of course, to take care of. So I had a close look at what didn’t work, print quality and the cause of the failure.
- The Heated Bed is heating up very slowly and struggles to maintain temperature
- When the G Code is loaded from Slic3r and the print button is pressed, nothing happens.
- There were a few sections of a couple of layers missing – and of course it ended missing layer(s) altogether which led to the failure
I come up with fixes to all these issues and try to print 3D Benchy for a second time….